If you’re looking for vacuum cleaner roller brushes, belts and accessory tool kits (including those for pet grooming and the Whole Home Accessory Kit) this is the place! You'll also find VersaVac replacement steam pads and water and vacuum filters.
This 8-piece Whole Home Accessory Tool Kit is designed to work with the Oreck® Touch™ bagless upright vacuum cleaner and help make cleaning easy. The all-in-one kit includes a horsehair floor tool, a hard surface brush for tile, stone and hardwood, a 2-in-1 flexible extension crevice and dusting brush, a drapery brush that's ideal for curtains, valances and mattresses, a turbo brush, an upholstery attachment for removing pet hair, a soft-bristled brush for delicate surfaces and a dusting tool to safely clean electronic equipment. All of the attachments feature advanced design for exceptional cleaning—think of it as a cleaning kit for your whole house!
See photos of each accessory and top features in the tabs below.
The Touch 3-piece interchangeable Pet Grooming Kit works with the Oreck Touch bagless upright vacuum cleaner. All 3 pieces are designed to attach to the wand or hose for quick and easy pet grooming. The kit includes a quick-release de-shedder, a brush attachment and a rubber de-shedder. It also comes with a 4 ft. hose extender (compatible with all 3 attachments) that enables you to increase the reach of the Touch quick-wand. Now you can groom like a pro at home! And because all that pet hair is sucked directly into the vacuum, you don't need to clean your home after you clean your pet.
NEW! The Touch™ extreme turbo brush can be used for multiple tasks and is designed to be used with the quick-wand on the Oreck Touch bagless upright vacuum cleaner. It features two interchangeable cleaning options: attached comb-like "fingers" as well as a brush, to help pull dirt out of fibers. Each can be manually flipped into an in-use position and will recede into the tool housing when the other is being used. The extreme turbo brush is ideal for all types of upholstery, including loose weaves such as linen and fabrics with a tighter weave.
NEW! The handy 4-in-1 Brush Tool can be used for multiple tasks and is designed to be used with the quick-wand on the Oreck Touch™ bagless upright vacuum cleaner. The drapery brush, used separately from the delicate and hard surface brushes, is ideal for curtains, valances and mattresses. But attach the drapery brush to either of those brushes and it's ready to take on a whole different set of cleaning chores. Connect it to the upholstery pet hair remover and it transforms into the tool you need to turn couches, chairs and even pet beds into fur-free zones!
NEW! This handy 2-in-1 accessory combines two tools in one and is designed to be used with the quick-wand on the Oreck Touch™ bagless upright vacuum cleaner. The crevice tool is ideal for getting behind and under furniture cushions as well as into narrow, hard-to reach areas where focused suction is needed. The brush tool has dozens of uses—anywhere you need a soft touch on a hard surface. (Computer keyboards and picture frames come to mind.) And the flexible portion of this accessory is helpful anytime (with either tool) when you need to get a good angle on the (cleaning) situation!
How it works
To use, attach the 2-in-1 tool to the end of the quick-wand.
If you need to extend the reach of the quick-wand, place your thumb on the "push" button on the longest section of the accessory and pull the tool apart in the middle. (This is where you'll also find the flexible section.)
To reduce the extension just push the tool back together until it clicks.
To convert from the crevice tool to the dusting brush, grip the brush tool on the "push" button and slide it out until it covers the end of the crevice tool. It easily slides back into place (and out of the way) to expose the crevice tool when the brush isn't needed.
These filters are designed to work with the vacuuming function of the Oreck VersaVac. This kit includes 1 main filter with filter sleeve and 1 exhaust filter. While both filters can be washed and re-used multiple times, they will eventually need to be replaced.
This hard water filter is designed to be used in the Oreck VersaVac. This kit includes 1 water filter.
Depending on hard water conditions in your area or how often you use the steam function on the VersaVac, the water filter should be replaced every 12 months. Minerals that form hard water will reduce the life of the water filter and will eventually allow deposits to build up in the heater of your VersaVac, diminishing its performance.
While the Versavac will work using plain tap water, Oreck recommends using distilled or de-mineralized water in your VersaVac to prolong the life of its filter and heater.